Gunsmithing Services

---

Minimum Labor Fee: $45.00

Labor Fee Per Hour: $75.00

Machine Fee Per Hour: $75.00

DCOA Cleaning: $75.00

Rush Fee: $45.00

Safety Checks: $45.00 + Test Fire Ammo

Mount & Bore Sight: $45.00

Drill & Tap Per Hole: $30.00

Remove Live Round: $75.00 + Labor Fee

Sight in Firearms: $75.00 + Ammo Fee

Thread & chamber Barrel: $300.00

Re-Chamber Barrel: $200.00

Cut & Crown Barrel: $75.00

Thread Barrel For Brake: $125.00

Polish Chamber: $45.00

Adjust Trigger: $45.00

Trigger Job on Non Standard Trigger: $75.00

Glass Bed Action: $110.00

Fit New Recoil Pad: $75.00 + Cust of pad

Blueprint Bolt action: $275.00

Chamber Cast: $75.00

 Level 1 Trigger/Action Job 

 The Level 1 trigger/Action job will give you a smooth, clean and light double action pull with a crisp 2lb single action pull. I start by polishing all interior components and then I hand stone the sear for that crisp single action pull. During this time I replace the hammer and rebound springs to reduce trigger pull weight and install an extra length firing pin for consistent never fail primer strike.

 Price $110.00 labor. Parts $45.00 

Level 2 Trigger/Action Job 

The level 2 trigger/action job gives you all the features of the level 1 plus I hand fit a new cylinder stop and hand that are CNC machined from solid tool steel replacing the cast or MIM factory parts. Then I tune the cylinder making sure the crane is properly aligned, reducing end shake and install a crane detent lock for added support. Next I polish the chambers for smoother extraction and bevel the chamber mouths for faster loading. Lastly, I re-contour the trigger so that it is smoother and more comfortable on the finger. And bob the hammer if desired. 

Price $295.00 labor. Parts $135.00

Level 2 Extreme Trigger/Action Job

The level 2 extreme trigger/action job has all the features of the level 1 and 2 action jobs plus I replace and hand-fit a new trigger and hammer that are CNC machined from solid tool steel replacing the factory cast or MIM parts. Giving you a solid no fail action that will last generations.

Price $365.00 Labor. Parts $425.00 

For J Frame S&W Revolvers

The constant Companion package is meant to provide you with the best concealed carry revolver that you can get. You can get the whole gun through us or it can be installed on your J frame Smith and Wesson revolver.. We do our Level one trigger and action job. Recontour and polish the trigger and Bob the hammer if desired. Then we bevel the chamber mouths and polish the chambers. We then install an XS front night sight and a set of Hogue G10 grips. This package cost is $475.93

 Ruger revolvers parts and prices are different please ask. Parts prices are subject to change. 

Trigger Job: $75.00 + Parts

Fit Match Barrel: $150.00

Flare & lower Ejection Port: $75.00

Cut Rear Sight on Slide: $120.00

Cut Dovetail Front Sight: $75.00

Fit Sights to Existing Dovetails: $65.00

Polish Ramp & Throat: $55.00

Open Chamber Throat: $65.00

Fit Thumb Safety: $45.00

Fit Ambi Safety: $65.00

Tune Extractor: $45.00

Bevel Mag Well: $95.00

Fit match Barrel Bushing: $65.00

Tighten Slide to Frame: $125.00

Facet front and Back Strap: $150.00

Checker Front Strap: $250.00

Dehorn Slide and Action: $175.00

Bobtail Mainspring Housing: $250.00

Beavertail Grip safety: $175.00